Below are the Specifications for our 11m Wide Bodied RHIB; follow the link below to view the Specification Sheet for our MCA Workboat, 'Jolene'. You can download both specifications in .pdf format by clicking the links above or at the bottom of each page, although you will require Adobe Reader to view the file. To save download Right-Click on link then select "Save Target As".

Wide Bodied RHIB Spec [view]  |  MCA Certified Workboat Spec [view]

---

Commercial Passenger Wide Bodied 11m RHIB - 3.3m beam

BUILT TO MCA CAT 3/Workboat Code

11m Humber Commercial Offshore Hull

Twin Yanmar 315Hp Engines

Electronics and Equipment as below

---

Vessel Specifications
Hull	Humber Offshore, wide beam 11m commercial
Tubes	Hypalon tubes, black rubbing strake
Fendering	Triple rubbing strake
	One piece 1500gsm commercial tubes
Cabin	Full length aluminium cabin, front aft opening
	Aluminium windows, toughened glass, one opening, 2 full length doors-part glazed
	Paint finish (expoxy) colour orange, buff interior
Safety Equipment	14 Man Life Raft
	Fire Fighting Equipment
	All other MCA Required Safety Equipment
Engines	Twin Yanmar 315 Inboard diesel c/w outdrives
	Engine beds and bearers and hull modifications
	Aluminium engine casing
Fuel	Under deck stainless steel fuel tank to MCA specifications
	Additional filling vent (rapid fill no blow back)
	Fuel line and fuel level sender
	Double filter system
	Aluminium access plates
	Fuel shut of valves
Electrics	2 x 110a/hour sealed batteries, holders, cable, etc.
	Breather vents to battery compartment
	Isolation switches
	Third isolation override
	Two Twin bus bar wiring
	Full Navigation Equipment, with Roxanne Plotter
	Power Inverter onboard 24VDC - 230AC
	Underwater Survey Cameras if required

return to top | download